Select this Check Box and fill in the Spacing field to generate points at fixed intervals.
The way the Spacing value is used depends on whether you have selected L-Line Stn or P-Line Reference in the Station range area below.
Survey Stations
To generate points at surveyed (P-line) stations.
Assignment Intervals
When templates, fill material, site preparation and sub-horizons are assigned reporting points are automatically created just before and after the interval boundaries. By checking this option these points are automatically re-created.
Remove Existing Points
Select this Check Box to remove existing points; this can be used to delete all, or a portion of, your design. See also Edit - Delete Range for point removal.
Station Range
Define the range where points will be generated (and/or deleted). You may use L-Line or P-Line station values. Note that only Plan points (see Point types below) may be generated outside the existing alignment and only if there is a P-Line.
Point Types
Select the point type you want to generate (or delete).
Plan points may only be automatically generated along a P-Line traverse; this option is disabled if there is no P-Line defined. If you wish to generate Plan points along the P-Line outside the existing alignment, use the P-Line station range to define the range. It is also possible to delete existing horizontal alignment and replace it with Plan points on the P-Line by checking both "Survey Stations" and "Remove Existing Points".
